Bling ULTRA Gel Family SDS Part 6

Customers Requiring a Copy, Please Email Sales@blinggalleria.com.

Revision 1.0 July 9, 2026

SAFETY DATA SHEET (SDS)

BLING ULTRA Gels - UV/LED Nail Gel System
Prepared in accordance with OSHA HazCom (29 CFR 1910.1200) and aligned with GHS

SECTION 1 - IDENTIFICATION

Product Name: Bling ULTRA Gels (UV/LED Nail Gel System) – (Variants and Shades Listed)

Applies to Bling ULTRA Gels Product Family as Follows:

Blue Diamond Top Coat

Recommended Use:

UV/LED-cured nail enhancement (professional use only). Intended for application to the nail surface only. Avoid contact with surrounding skin prior to curing. For external cosmetic use only.

Restrictions on Use:

Not intended for application to skin. Not for ingestion.

Distributor:

Bling Galleria / Laydahop Inc.
311 Golf Road, Suite 1000 #1018
West Palm Beach, FL 33409 USA

Emergency Contact:

Hazmat Line Emergency Response Phone: +1 656 258 0408 (24 hours, 7 days per week)

Non-Emergency Product Information:

1-728-230-7888 

SECTION 2 - HAZARD IDENTIFICATION

GHS Classification (mixture)

·       Acute toxicity, Oral - Category 4 (H302)

·       Skin Irritation - Category 2 (H315)

·       Skin Sensitization - Category 1 (H317)

·       Eye Irritation - Category 2A (H319)

·       Short-term (acute) aquatic hazard - Category 1 (H400)

Label Elements

Signal Word: WARNING

Hazard Statements:

·        H302: Harmful if Swallowed

·        H315: Causes skin irritation.

·        H317: May cause an allergic skin reaction.

·        H319: Causes serious eye irritation.

·        H400: Very toxic to aquatic life

Precautionary Statements (Prevention):

·        P261: Avoid breathing dust generated during filing of cured product.

·        P264: Wash hands thoroughly after handling.

·        P270: Do not eat, drink or smoke when using this product.

·        P272: Contaminated work clothing should not be allowed out of the workplace.

·        P273: Avoid release to the environment.

·        P280: Wear protective gloves and eye protection.

Precautionary Statements (Response):

·        P301 + P312 + P330: IF SWALLOWED: Call a POISON CENTER/doctor if you feel

·        unwell. Rinse mouth.

·        P302+P352: IF ON SKIN: Wash with plenty of soap and water.

·        P305+P351+P338: IF IN EYES: Rinse cautiously with water for at least 15 minutes. Remove contact lenses if present and easy to do. Continue rinsing.

·        P332+P313: If skin irritation occurs: Get medical advice/attention.

·        P333+P313: If skin irritation or rash occurs: Get medical advice/attention.

·        P337+P313: If eye irritation persists: Get medical advice/attention.

·        P362+P364: Take off contaminated clothing and wash it before reuse.

Precautionary Statements - Storage

·        P403+P233: Store in a well-ventilated place. Keep container tightly closed.

·        P405: Store locked up.

Precautionary Statements - Disposal

·        P391: Collect Spillage.

·        P501: Dispose of contents and container in accordance with applicable local, state, and federal regulations.

Other Hazards

·        Repeated or prolonged skin contact with uncured product may cause allergic skin sensitization in susceptible individuals. Avoid direct skin contact prior to curing.

·        Follow proper PPE protocols at all times.

·        Polymerization occurs upon exposure to UV/LED light (intentional curing reaction).

·        Avoid breathing dust generated during filing or removal of cured product.

·        No hazards not otherwise classified (HNOC) have been identified for this product. 

SECTION 3 - COMPOSITION / INFORMATION ON INGREDIENTS

Ingredients / Mixture Description

This product is a UV/LED-curable acrylate-based cosmetic gel mixture designed for curing under UV/LED light into a solid polymer film. Exact composition varies by shade and product variant. Listed components represent typical ranges across the product family.

Composition Notes

·       Classification based on available supplier hazard information.

·       Multi-component acrylate-based UV/LED polymerizable gel system.

·       Hazard classification is based on the mixture as supplied (uncured state).

·       Upon UV/LED exposure, the product undergoes polymerization into a solid polymer film.

·       Cosmetic pigments are dispersed in a polymer matrix and are not expected to present inhalation hazards under normal use.

·       Exact formulation varies by shade, opacity, and effect variant but remains within the same chemical hazard profile. Not all listed ingredients are present in every product variant. Listed concentration ranges represent the product family as a whole.

SECTION 4 - FIRST AID MEASURES

Skin Contact: Wash immediately with soap and water. If a skin rash or allergic reaction develops, seek medical advice/attention.

Eye Contact: Rinse cautiously with water for at least 15 minutes. Remove contact lenses if present and easy to do. Seek medical attention if symptoms occur.
Inhalation: Move to fresh air. Seek medical attention if symptoms occur.
Ingestion: Rinse mouth. Do NOT induce vomiting unless directed by medical personnel. Immediately contact a Poison Center or physician if the product has been swallowed.

SECTION 5 - FIRE-FIGHTING MEASURES

Suitable Extinguishing Media: CO₂, dry chemical, foam
Unsuitable Media: Water jet (may spread burning material)

Hazardous Decomposition Products: Carbon oxides, phosphorus oxides, and irritating organic vapors.

Firefighter Protection: Self-contained breathing apparatus (SCBA) required

SECTION 6 - ACCIDENTAL RELEASE MEASURES

·        Avoid skin and eye contact.

·        Prevent release to drains, sewers, waterways, or soil. Avoid environmental release. Collect spilled material for proper disposal.

·        Absorb with inert material (sand, vermiculite).

·        Collect in sealed container for disposal.

·        Clean residual material using a detergent solution. 

SECTION 7 - HANDLING AND STORAGE

Handling:

·        Avoid skin contact.

·        Avoid repeated or prolonged skin contact with uncured product to minimize the potential for skin sensitization.

·        Wear nitrile gloves and eye protection.

·        Wash exposed skin thoroughly with soap and water after handling.

·        Avoid exposure to natural sunlight, UV lamps, and strong artificial light prior to use.

·        Use with adequate ventilation

·        Keep away from food, beverages, and animal feed

·        Do not ingest

·        Avoid release to the environment. Avoid discharge of uncured product into drains or waterways.

Storage:

·        Store 5–25°C (41–77°F)

·        Keep containers tightly closed

·        Protect from UV light, heat, and direct sunlight

·        Do not freeze

SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION

Engineering Controls:

·        Provide local exhaust dust ventilation at nail workstations (e.g., nail dust collectors).

·        General dilution ventilation is acceptable for incidental exposure during professional application.

·        Use adequate local exhaust ventilation where repeated professional use occurs.

·        Follow manufacturer instructions for UV/LED curing equipment.

Personal Protective Equipment:

·        Nitrile or neoprene gloves, 4-8 mil thickness.

·        Inspect gloves before each use and replace immediately if degraded, torn, or contaminated.

·        Wash hands thoroughly after removing gloves.

·        Safety glasses or chemical goggles

·        Protective clothing for prolonged exposure

Environmental Controls:

·        Use engineering controls to prevent product from reaching drains, sewers, or the environment.

SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES

·        Appearance: Viscous gel

·        Color: Various

·        Odor: Mild acrylic

·        pH: Not applicable (viscous gel)

·        Melting Point: Not Determined

·        Freezing Point: Not Determined

·        Boiling Point: Not Determined

·        Flash Point: Estimated to exceed 100°C (212°F) based on formulation characteristics (uncured product; not classified as a flammable liquid).

·        Density (g/cm³): Estimated 1.1-1.2 (H₂0=1)

·        Specific Gravity: Estimated 1.1-1.2

·        Solubility: Insoluble in water

·        Vapor Pressure: Negligible

·        Evaporation Rate: Negligible (low-volatility gel matrix)

·        Flammability: Not classified as flammable

·        Viscosity: High; gel to semi-solid consistency

·        VOC: Negligible.

SECTION 10 - STABILITY AND REACTIVITY

Reactivity: None under normal conditions of storage and use.
Chemical Stability: Stable under normal conditions. Stable under recommended storage and handling conditions. Stable when stored in tightly closed containers away from UV light, heat, and incompatible materials.
Polymerization: Intended photopolymerization occurs upon exposure to UV/LED light. Hazardous polymerization is not expected under recommended storage conditions.
Conditions to Avoid: Exposure to UV radiation, direct sunlight, excessive heat, or prolonged exposure to high-intensity light sources.
Incompatible Materials: Strong oxidizing agents, strong mineral acids, strong bases/alkalis, organic peroxides, and free-radical initiators.
Decomposition Products: CO, CO₂, phosphorus oxides, organic vapors

SECTION 11 - TOXICOLOGICAL INFORMATION (HUMAN HEALTH)

Exposure Routes:

·       Skin contact: Primary potential route of occupational exposure due to possible accidental contact during application. Contact with uncured product may cause skin irritation and may lead to allergic skin sensitization following repeated exposure.

·       Inhalation: Secondary route of exposure. Low vapor pressure limits inhalation exposure under normal use conditions. Dust may be generated during filing of cured product. 

·       Eye contact: Direct contact may cause irritation.

·       Ingestion: Swallowing may be harmful. Accidental ingestion may result in gastrointestinal irritation. Ingestion is not an expected route of exposure during intended cosmetic use.

Acute Effects:

·       Direct contact with uncured product may cause skin irritation and eye irritation. Sensitized individuals may develop an allergic skin reaction.

·       Ingestion is not an anticipated route during intended cosmetic use.

Chronic Effects:

·       Repeated or prolonged skin exposure to uncured product may increase the risk of allergic contact dermatitis in susceptible individuals.

·       This mixture is not classified as carcinogenic under GHS.

Toxicology Endpoints:

·       Aspiration Hazard: Not classified.

·       Germ Cell Mutagenicity: Not classified.

·       Reproductive Toxicity: Not classified.

·       STOT (Single Exposure): Not classified.

·       STOT (Repeated Exposure): Not classified.

Additional Notes:
Environmental hazards are addressed in Section 12 and are based on available formulation and ingredient hazard information. 

SECTION 12 - ECOLOGICAL INFORMATION

Ecotoxicity:
Based on the hazardous properties of one or more ingredients, the mixture is classified as Aquatic Acute Category 1 (H400): Very toxic to aquatic life. Avoid release to the environment. Prevent entry into drains, waterways, and soil.

Persistence and Degradability:
No experimental degradation data are available for the finished mixture. The cured polymer structure is expected to have limited biodegradability due to its polymeric nature.

Bioaccumulative Potential:
No experimental bioaccumulation data are available for the finished mixture. Information regarding individual components may vary depending on supplier data.

Mobility in Soil:
Due to its high viscosity and low water solubility, the uncured product is expected to have limited mobility in soil.

Other Adverse Effects:
Avoid uncontrolled release of uncured product into the environment. Spills should be contained and collected according to applicable regulations.

SECTION 13 - DISPOSAL CONSIDERATIONS

·        Dispose in accordance with local, regional, and national regulations

·        Uncured product: treat as chemical waste where required

·        Cured product: generally non-hazardous solid waste

·        Do not discharge into drains or waterways

·        Prevent environmental release during disposal

SECTION 14 - TRANSPORT INFORMATION

UN Number

Not regulated - No UN number assigned

Proper Shipping Name

Not applicable

Transport Hazard Class

Not applicable

Packing Group

Not applicable

DOT (USA) - 49 CFR

·       Not regulated as a hazardous material

·       Does not meet criteria for flammable liquids, corrosives, or toxic substances

IMDG (Marine Transport)

·       Not regulated as dangerous goods

·       Environmental classification under transport regulations should be confirmed based on applicable transport requirements.

IATA (Air Transport)

·       Not regulated as dangerous goods under IATA DGR

·       No special air transport restrictions under normal conditions

TDGR (Canada)

·       Not regulated as dangerous goods under the Transportation of Dangerous Goods Regulations

·       No UN classification assigned

ADR/RID (Europe)

·       Not regulated as dangerous goods under ADR (road) or RID (rail)

·       No UN number or hazard class assigned

Mexico (SCT)

·       Not regulated as hazardous materials under applicable Mexican transport regulations

·       No UN classification assigned

Environmental Hazards

·       Classification as an environmentally hazardous substance for transport purposes has not been assigned based on available information. Confirm transport classification requirements before shipment.

Special Precautions

·       Protect from heat and direct sunlight during transport

·       Keep containers tightly closed

·       Prevent exposure to UV/LED light sources prior to use

·       Avoid container damage or leakage

Transport Rationale

Based on formulation characteristics:

·       High-viscosity polymer gel system

·       Low volatility (no flammable solvent content)

·       Non-corrosive and non-reactive under normal transport conditions

·       Photoinitiator concentration below transport classification thresholds

·       Does not meet criteria for regulated dangerous goods under major transport frameworks

SECTION 15 - REGULATORY INFORMATION

U.S. Federal Regulations

• OSHA Hazard Communication Standard (29 CFR 1910.1200): This product is classified as a hazardous chemical mixture due to health hazards including acute toxicity, skin irritation, skin sensitization, eye irritation, and environmental hazards under GHS-aligned classification.
• TSCA (Toxic Substances Control Act): All intentionally added chemical substances are listed on the TSCA Inventory, exempt, or otherwise compliant with applicable requirements.
• SARA Title III (311/312): This product is classified under applicable OSHA Hazard Communication health hazard categories for Skin Irritation, Eye Irritation, and Skin Sensitization.
• SARA 313: This product does not contain reportable toxic chemicals subject to reporting requirements.

California Proposition 65

Based on available supplier information and formulation information, this product does not intentionally contain substances listed under California Proposition 65 at levels requiring a warning under normal conditions of use.

U.S. FDA Cosmetic Regulations (21 CFR)

·        Color additives used in this formulation are intended for cosmetic use and are used in accordance with applicable FDA regulations governing color additives in cosmetics.

·        This product is intended for cosmetic application only and is not intended for ingestion or pharmaceutical use.

International Regulations

·        EU CLP (Regulation EC No. 1272/2008): Classified as Skin Irrit. 2, Skin Sens. 1, Eye Irrit. 2, and Aquatic Acute 1 based on available formulation information.

·        Canada WHMIS: Classified as an irritant and skin sensitizing mixture consistent with GHS-aligned WHMIS criteria.

SECTION 16 - OTHER INFORMATION

This Safety Data Sheet (SDS) has been prepared in accordance with the OSHA Hazard Communication Standard (29 CFR 1910.1200) and aligned with the Globally Harmonized System (GHS) for classification and labeling of chemicals. It is based on information available from raw material suppliers, formulation data, and currently applicable regulatory guidance at the time of preparation.

The information provided herein is believed to be accurate and reliable; however, it is supplied without warranty or guarantee of completeness or absolute accuracy. The conditions or methods of handling, storage, use, and disposal of the product are beyond the control of the distributor. Users are responsible for determining the suitability of this information for their specific applications and for ensuring compliance with all applicable local, state, and federal regulations.

This SDS is intended for downstream users, including distributors, professional nail technicians, and retailers handling the product as supplied. It applies only to the product in its original form and does not cover hazards that may arise from mixing, dilution, or combination with other materials.